DIC SET IX

The DIC Set-IXS Injection Packer is a versatile, general-purpose, large-bore, double-grip, retrievable packer. A mechanical locking system allows the packer to hold pressure from above and below. After setting, the ‘IXS’ can be left with tubing in tension, compression, or neutral.

Primarily designed for injection wells but can also be used for production, zone isolation, or remedial operations. DIC Set-IXS can be set shallow with tension or deeper with compression and, once set can remain in neutral.

DIC Set–S2LS packer is a compression-set, retrievable packer that enables tubing to be landed in a tension, compression, or neutral condition.

Right rotation sets and releases the packer. Internal bypass equalizes pressure before the slips are unset for safety and reliability.

The DIC Set-II Packer is a double-grip compression set tool suitable for treating, testing, and production applications. The DIC Set-II features a large bypass area to prevent swabbing when running or retrieving.

Once the tool is set, upward or downward pressure acts on the valve to maintain the seal and prevent upward movement of the tubing.

Releasing the valve allows debris to be washed from the upper slips.

DIC-Snap Set-II Packer is a compression set tool requiring only a straight set down weight (slack) to pack off. It is run above in tandem with other packers, such as the DIC Set-IXS.

The packer is also equipped with an internal latch to prevent per-setting when running. Upon release, the latch re-engages to allow movement down the hole.