Hydraulic Set Permanent Packer
Hydraulic Set Permanent Production Packers are the hydraulically set one trip completion packers, suitable for large volume production in high angle, extremely deviated well.
These packers mark the largest possible bore through combined packer and seal accessory. The packer is run on the hydro-set anchor latch seal unit which is made up in the top of the packer through the left-hand threads on the latch and is set by applying tubing pressure.
The packer required some type of temporary plugging device such as a shear out plug or wireline blanking plug located close to the end of the tubing.
- Slim-line design
- Solid construction allows 50% faster run-in without fear of impact damage or premature setting, making important rig-time savings possible.
- Two opposed sets of full-circle, full-strength slips ensure packer will go on properly set.
- Distinctive interlocking, expandable, metal backup rings contact casing, creates a positive obstacle to packing element extrusion.
Advantages:
